Shower Repair & Installation
A shower that drips after you shut it off, loses pressure, or suddenly runs too hot or too cold usually has a plumbing problem behind it. Sometimes it is as simple as a clogged showerhead or worn cartridge. Other times the valve, diverter, or plumbing behind the wall needs attention.
Shower Repair for Prescott Homes
Mineral buildup is a common problem in showers, especially on fixtures that have been in service for years. It can restrict the holes in a showerhead, make a valve harder to turn, and eventually cause cartridges and seals to stop working properly. You may notice the problem gradually. The water pressure gets weaker, the handle becomes harder to move, or the shower keeps dripping long after you turn it off. In some cases, cleaning the fixture is enough. In others, the cartridge or valve needs to be replaced. The important part is figuring out which one you’re dealing with.
Low Water Pressure From the Shower
When only one shower has poor pressure, the showerhead is a good place to start. Mineral deposits can build up inside the spray holes and restrict the flow. If cleaning or replacing the showerhead doesn’t solve it, the valve cartridge may be partially blocked or worn out. When the pressure is low throughout the house, that’s a different problem. The issue may be related to the main water supply, pressure regulator, shutoff valve, or another part of the plumbing system. In that situation, replacing the showerhead won’t fix the underlying problem.
Shower Keeps Dripping After It’s Turned Off
A shower that continues to drip usually has a worn cartridge, valve, or seal that is no longer shutting the water off completely. We’ve seen this problem on both older and newer showers. Sometimes a cartridge replacement takes care of it. If the valve body is damaged or badly corroded, a larger repair may be necessary. The right repair depends on the condition of the existing valve, not just the symptom you’re seeing.
Shower Handle Is Hard to Turn
A stiff shower handle is often caused by mineral buildup or a cartridge that is beginning to fail. Don’t force the handle. A cartridge that is already sticking can become much harder to remove, and excessive force can damage the valve behind the wall. We can inspect the valve, determine what’s causing the problem, and let you know whether the cartridge can be replaced or the valve needs additional work.
Shower Temperature Keeps Changing
If the water suddenly goes from hot to cold or the temperature is difficult to control, the valve or cartridge may not be working correctly. A faulty pressure-balancing valve can also cause temperature changes when another fixture in the house is turned on. These problems are worth fixing rather than just adjusting the handle and hoping they go away. A properly working shower valve should give you consistent control over both water flow and temperature.
Showerhead, Faucet and Diverter Repair
We work on the common problems homeowners run into with tub and shower fixtures, including:
Showerhead replacement and installation
Shower faucet repair
Leaking shower faucets
Cartridge replacement
Stiff or difficult handles
Diverter repair
Tub and shower valve repair
Handheld shower installation
Shower fixture replacement
Low-flow showerhead installation
We work with common plumbing fixture brands and can help determine what replacement part is needed before ordering something that doesn’t fit.
Shower Valve Repair or Replacement?
Replacing the entire valve isn’t always necessary. If the valve body is in good condition, replacing the cartridge or another internal component may be all that’s needed. A full valve replacement becomes more appropriate when the valve is damaged, badly corroded, leaking behind the wall, or needs to be upgraded. We’ll check the existing plumbing and explain the options before the work starts.
Shower Installation in Prescott
Building a new bathroom, remodeling an older one, or replacing outdated shower fixtures? We can help with shower plumbing and fixture installation.
Depending on the project, that can include:
- Shower faucets and valves
- Showerheads
- Handheld sprayers
- Tub and shower fixtures
- Diverters
- Water supply connections
- Drain connections
- Fixture replacement
For remodels, getting the plumbing connections right before the walls are closed up can save you a much bigger headache later.
Shower Repair Cost in Prescott
There isn’t one price that fits every shower repair. Replacing a showerhead is usually a much smaller job than opening a wall to replace a damaged valve. Cartridge replacement, diverter repairs, valve replacement, and new fixture installation all depend on the existing plumbing and how accessible the parts are. We inspect the problem and explain the repair before moving forward, so you know what you’re paying for.
Need Shower Repair in Prescott?
Whether your shower is dripping, losing pressure, stuck on one temperature, or simply needs new fixtures, we’re here to help you in Prescott and Prescott valley.
Call (520) 524-4876 and tell us what’s going on with your shower. We’ll help you figure out the next step and get the plumbing working properly again.